Ryobi RY40500 Manual do Operador

Cette scie à chaîne a été conçue et fabriquée conformément aux strictes normes de fiabilité, simplicité d’emploi et sécurité d’utilisation. Correcteme

10 - EnglishFEATURESPRODUCT SPECIFICATIONSMotor ...

11 - EnglishFEATURESKNOW YOUR CHAIN SAWSee Figure 5.The safe use of this product requires an under-standing of the information on the tool and in this

12 - EnglishWARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or

13 - EnglishTo install: Place the battery pack in your chain saw. Align raised rib on battery pack with groove in chain saw’s battery port.  Make su

14 - English Press and hold the switch trigger, release the lock-out button and continue to squeeze the switch trigger for continued operation.Stoppi

15 - EnglishOPERATIONSTRAIGHT ARM POSITIONCHAIN LINEWARNING:Do not operate the switch trigger with your left hand and hold the front handle with your

16 - EnglishWORK AREA PRECAUTIONSSee Figure 14. Cut only wood or materials made from wood, no sheet metal, no plastics, no masonry, no non-wood build

17 - EnglishWARNING:Closely check for broken or dead branches, which could fall while cutting and do not cut near buildings or electrical wires if you

18 - English Notched Undercut. Cut a notch about 1/3 the diameter of the tree, perpendicular to the direc-tion of fall. Make the cuts of the notch so

19 - EnglishOPERATION When bucking on a slope, always stand on the uphill side of the log. To maintain complete con-trol of the chain saw when cuttin

2 Introduction ...

20 - English Keep the tree between you and the chain saw while limbing. Cut from the side of the tree opposite the branch you are cutting.PRUNINGSee

21 - EnglishMAINTENANCEWARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damag

22 - EnglishNOTE: When replacing the guide bar and chain, always use the specified bar and chain listed in the Bar and Chain Combinations section lat

23 - EnglishHold the tip of the guide bar up and tighten the chain cover lock knob.The chain is correctly tensioned when there is no sag on the unde

24 - EnglishFig. 33ADJUSTING THE CHAIN TENSIONSee Figures 31 - 32.WARNING:Never touch or adjust the chain while the motor is running. The saw chain is

25 - EnglishHOW TO SHARPEN THE CUTTERSSee Figures 36 - 37.Be careful to file all cutters to the specified angles and to the same length, as fast cutti

26 - EnglishMAINTENANCESIDE PLATE ANGLESee Figure 39. CORRECT - 80° Produced automatically if cor-rect diameter file is used in file holder. HOOK

27 - EnglishFig. 44MAINTENANCEFit the locking rivet or tab in the recessed hole in the guide bar.Tighten the screw with wrench until snug.From t

28 - EnglishPROBLEM CAUSE SOLUTIONBar and chain running hot and smoking. Motor runs, but chain is not rotating.1. Check chain tension for over tigh

29 - EnglishLIMITED WARRANTY STATEMENTTechtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outd

3 - EnglishGENERAL SAFETY RULESREAD ALL INSTRUCTIONSBASIC SAFETY PRECAUTIONS Do not operate a chain saw with one hand! Use a firm grip with thumbs an

4 - EnglishGENERAL SAFETY RULESKICKBACKSee Figures 1 - 4. WARNING: Kickback may occur when the moving chain contacts an object at the upper portion o

5 - English Keep proper footing and balance at all times. Do not cut above shoulder height or overreach when cutting. Keep the SAFE-T-TIP® anti-kic

6 - English Battery operated units do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware

7 - EnglishThe following signal words and meanings are intended to explain the levels of risk associated with this product.SYMBOL SIGNAL MEANINGDANGER

8 - EnglishSome of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbol

9 - EnglishGLOSSARY OF TERMSBuckingThe process of cross cutting a felled tree or log into lengths.Chain Saw PowerheadA chain saw without the saw chain