Ryobi TS1344L Manual do Operador descarregar pdf (Página 28)

ADJUSTMENTS

DANGER:

Laser radiation. Avoid direct eye contact with light source.

WARNING:

Use of controls or adjustments or performance of pro-

cedures other than those specified herein can result in

hazardous radiation exposure.

TO ADJUST THE LASER GUIDE

See Figure 34.

 Use the work clamp or a C-clamp to secure a piece of

scrap wood.

 Plug the saw into the power source and make a slight

cut to score the wood.

 Release the switch trigger and allow the saw blade to

stop rotating before raising the blade.

 Raise the saw arm.

 Unplug the saw.

 Using the Phillips end of the supplied blade wrench, loosen

the laser adjustment screw and move laser assembly until

aligned.

NOTE: When properly aligned, the laser should be on the

left edge of the kerf.

 Holding the laser assembly, tighten the laser adjustment

screw.

LASER

ADJUSTMENT

SCREW

Fig. 34

LASER

ASSEMBLY

1 2 ... 23 24 25 26 27 28 29 30

RFK 27 Jul 2025 | 14:16:59

Great manual. Thanks!

Ryobi TS1344L Manual do Operador Página 28