Ryobi HD501 Manual do Operador descarregar pdf

OPERATOR'S MANUAL

HD501 - 1/2 in. (13 mm) Hammer Drill

DOUBLE INSULATED

SAVE THIS MANUAL FOR FUTURE REFERENCE

THANK YOU FOR BUYING A RYOBI HAMMER DRILL.

Your new hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,

and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new hammer drill.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your hammer drill properly and only

for what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so we can be of future service to you.

Thank you again for buying Ryobi tools.

SPECIFICATIONS:

Chuck Capacity 1/16 in. (1.5 mm) - 1/2 in. (13 mm)

Rating 120 volts, 60Hz, AC only, 5.5 Amperes

No Load Speed 0 - 1,000 & 0 - 3,000 RPM

Hammer Speed 0 - 48,000 BPM

Switch Adjustable Variable Speed/Reversible

1 2 3 4 5 6 ... 15 16

Resumo do Conteúdo

Página 1 - OPERATOR'S MANUAL

OPERATOR'S MANUALHD501 - 1/2 in. (13 mm) Hammer DrillDOUBLE INSULATEDSAVE THIS MANUAL FOR FUTURE REFERENCETHANK YOU FOR BUYING A RYOBI HAMMER DRI

Página 2 - INTRODUCTION

Page 10OPERATIONUSING DEPTH GAGE RODSee Figure 6.A depth gage rod has been installed on your hammer drill toassist you in controlling the depth of dri

Página 3 - GENERAL SAFETY RULES

Page 11OPERATIONWARNING:Your hammer drill should never be connected to powersupply when you are assembling parts, makingadjustments, installing or rem

Página 4 - SPECIFIC SAFETY RULES

Page 12OPERATIONFig. 10TWO-SPEED GEAR SHIFT KNOBSee Figure 10.The hammer drill has a two-speed gear shift knob whichprovides a high speed of approxim

Página 5 - SAVE THESE INSTRUCTIONS

Page 13CHUCK REMOVALCHUCK REMOVALSee Figures 11, 12, and 13.Whenever necessary to remove the chuck for replacement,use the following procedure for chu

Página 6 - UNPACKING

Page 14MAINTENANCEGENERALAvoid using solvents when cleaning plastic parts. Most plas-tics are susceptible to damage from various types of commer-cial

Página 7 - FEATURES

Page 15NOTES

Página 8

972000-947 10-01 OWNER'S OPERATING MANUAL1/2 in. (13 mm) Hammer Drill - HD501DOUBLE INSULATEDRYOBI TECHNOLOGIES, INC.1428 Pearman D

Página 9

Page 2TABLE OF CONTENTS Product Specifications...

Página 10 - OPERATION

Page 3The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and theexplanations with them, deserve your

Página 11

Page 4 Disconnect the plug from the power source beforemaking any adjustments, changing accessories, orstoring the tool. Such preventive safety measu

Página 12

Page 5SAVE THESE INSTRUCTIONSSPECIFIC SAFETY RULESWARNING:Some dust created by power sanding, sawing, grinding,drilling, and other construction activi

Página 13

Page 6ELECTRICALELECTRICAL CONNECTIONYour hammer drill has a precision built electric motor. Itshould be connected to a power supply that is 120 volts

Página 14 - MAINTENANCE

Page 7APPLICATIONS(Use only for the purposes listed below) Hammer drilling in concrete and masonry. Drilling in wood. Drilling in ceramics, plastic

Página 15

Page 8SWITCHSee Figure 2.To turn your hammer drill ON, depress the switch trigger.Release switch trigger to turn your hammer drill OFF.LOCK-ON BUTTONS

Página 16 - OWNER'S OPERATING MANUAL

Page 9Fig. 5OPERATIONVARIABLE SPEEDCONTROL SELECTORTOINCREASESPEEDTODECREASESPEEDVARIABLE SPEEDSee Figure 5.Your hammer drill has a variable speed con

Comentários a estes Manuais

Sem comentários

Ryobi HD501 Manual do Operador

Consulte online ou descarregue Manual do Operador para Ferramentas elétricas Ryobi HD501. Ryobi HD501 Operator`s manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Ryobi HD501