Ryobi P610 Manual do Operador descarregar pdf (Página 18)

MAINTENANCE

REPLACING THE BELT

See Figures 17 - 18.

When replacing the belt, use recommended replacement

belt only (Part No. 570279002).

 Remove the battery pack from the tool.

 Remove the belt cover screws.

 Remove the belt cover.

 Force the old belt from the small pulley by turning in the

direction shown. As you turn the belt, pull and work it

off the small pulley until it has been completely removed

from both pulleys.

 Install the new belt over the large pulley. As you turn the

belt, push and work it onto the small pulley until it is in

place.

 Make sure the belt is flush with the edge of both

pulleys.

 Replace the belt cover.

 Install the belt cover screws and tighten securely.

NOTE: Do not overtighten the screws.

Fig. 17

Fig. 18

BELT COVER

LARGE PULLEY

SCREWS

SMALL PULLEY

1 2 ... 13 14 15 16 17 18 19 20

Sem comentários

Ryobi P610 Manual do Operador Página 18