Ryobi JS550LK Manual do Utilizador descarregar pdf (Página 14)

-11-

Seal Lock Hex. Socket HD. Bolt M3 X 10 [1]

Spring (D) [7]

Lever (A) [6]

Special Bolt M4 [5]

Holder Pin (B) [8]

Spring (B) [9]

Blade Holder (B) [10]

Holder Plate [11]

Seal Lock Hex. Socket HD. Bolt M3 X 6 [12]

Blade Holder (A) [3]

Blade Holder Ass’y [2]

Pin D3 [4]

Plunger Holder (A) [14]

Plunger [15]

Plunger Holder (B) [16]

Packing [17]

● Disassembly of Plunger Holder (A) and Blade Holder Assembly

Retaining Ring For D7

Shaft [18]

Connecting Piece (A) [19]

Needle Bearing [20]

Gear [21]

Balance Weight [23]

Orbital Cam [24]

Washer (A) [25]

Gear Holder Ass’y [28]

● Disassembly of Gear Holder Assembly and Armature

4. Disassembly of Plunger Holder (A) and Blade Holder Assembly

(1) Remove Plunger [15], Plunger Holder (A) [14], Plunger Holder (B) [16], and Packing [17] together.

(2) Loosen two Seal Lock Hex. Socket HD. Bolts M3 X 10 [1], remove Blade Holder Ass'y [2], and then pull

out Packing [17] and Plunger Holder (B) [16].

5. Disassembly of Gear Holder Assembly and Armature

(1) Pull out Connecting Piece (A) [19] and Needle Bearing [20] from Gear [21].

(2) Remove Retaining Ring For D7 Shaft [18] at the tip of the spindle.

(3) Remove Gear [21], Balance Weight [23], Orbital Cam [24], and Washer (A) [25] in this order.

(4) Pull out press-fitted Armature [31] from Gear Holder Ass'y [28].

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Sem comentários

Ryobi JS550LK Manual do Utilizador Página 14