Ryobi P501 Manual do Operador

OPERATOR’S MANUAL5-1/2 in., 18 VOLTCIRCULAR SAW P501SAVE THIS MANUAL FOR FUTURE REFERENCEYour circular saw has been engineered and manufactured to Ryo

10 11FEATURESKNOW YOUR CIRCULAR SAWSee Figure 1.Before attempting to use this product, familiarize yourself with all operating Features and Safety Rul

10 114545505030302222112304545455050303022221123045ASSEMBLYATTACHING THE BLADESee Figure 2.WARNING: A 5-1/2 in. blade is the maximum blade capacity of

12 13OPERATIONCHARGING A COOL BATTERY PACKIf battery pack is within normal temperature range, the red LED on charger will come on. NOTE: If the cha

12 1313OPERATIONCHARGING A HOT BATTERY PACKWhen using the tool continuously, the batteries in the battery pack will become hot. You should let a hot b

14 15OPERATIONFig. 6Fig. 7Fig. 8Fig. 9INCORRECT SUPPORTCORRECT SUPPORTKICKBACK - BLADE SET TOO DEEPCORRECT BLADE DEPTH SETTING = BLADE EXPOSED 1/4 in.

14 15OPERATIONSAW BLADESThe best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will p

16 17OPERATIONADJUSTING BLADE DEPTHSee Figure 12.Always keep correct blade depth setting. The correct blade depth setting for all cuts should not exce

16 174545505030302222OPERATIONOPERATING THE SAWSee Figures 13 - 15.It is important to understand the correct method for operat-ing the saw. Refer to t

18 19041451234545505030302222CROSS CUTTING/RIP CUTTINGSee Figure 16.When making a cross cut or rip cut, align the line of cut with the outer blade gui

18 19Fig. 21231450154550302314501545503004145123OPERATIONBEVEL CUTTINGSee Figures 19 - 21.n Align the line of cut with the inner blade guide notch on

2 3n Introduction ...

20 214545505030302222OPERATIONn Release the trigger and allow the blade to come to a complete stop.n Lift the saw from the workpiece.n Clear corner

20 211245001522304550Fig. 23BEVELADJUSTMENTKNOBBLADECARPENTER'SSQUAREADJUSTMENTSCREWHEX NUTPOSITIVE 0°BEVEL STOPADJUSTMENTSWARNING: Before perfor

22 23MAINTENANCEWARNING:When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or caus

22 23NOTES

24RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Post Office Box 1207, Anderson, SC 29622-1207Phone 1-800-525-2579www.ryobitools.c

2 3GENERAL SAFETY RULESWARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-ure to follow all instructions listed below, may result in electric shock,

4 5n DANGER! Keep hands away from cutting area and blade. Keep your second hand on the auxiliary handle or motor housing. If both hands are ho

4 5n Support large panels to minimize the risk of blade pinching and KICKBACK. Large panels tend to sag under their own weight. Suppor

6 7n An extension cord should not be used unlessabsolutely necessary. Use of improper extension cord could result in a risk of fire an

6 7SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols w

8 9SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we

8 9LOCK-OFF BUTTONFEATURESFig. 1PRODUCT SPECIFICATIONSMotor.................18 Volt DCBlade Diameter.