Ryobi RY30931 Manual do Utilizador descarregar pdf (Página 20)

OPERATION

STARTING AND STOPPING

See Figures 21 - 23.

To start a cold engine:

DO NOT squeeze the throttle trigger until the engine starts

and runs.

Lay the trimmer on a flat, bare surface.

PRIME - Press the primer bulb 7 times.

SET the start lever to the START position.

PULL the rope until the engine starts.

Wait 6-10 seconds, then squeeze the trigger to run.

NOTE: Squeezing and releasing the throttle trigger releases

the start lever to the RUN position.

To start a warm engine:

PULL the rope until the engine starts.

To stop the engine:

Press and hold the switch in the stop “ ” position until

the engine stops.

Fig. 22

Fig. 21

THROTTLE

TRIGGER

IGNITION

SWITCH

THROTTLE

TRIGGER

IGNITION

SWITCH

Fig. 23

PRIMER BULB

TRIGGER

LOCK

START

POSITION

START

LEVER

START

LEVER

RUN

POSITION

TRIGGER

LOCK

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

OPERATOR’S MANUAL 1
TABLE OF CONTENTS 2
INTRODUCTION 2
GENERAL SAFETY RULES 3
SPECIFIC SAFETY RULES 4
SAVE THESE INSTRUCTIONS 6
FEATURES 7
ASSEMBLY 10
OPERATION 15
MAINTENANCE 21
TROUBLESHOOTING 25
CALL US FIRST 26
WARRANTY 27

Comentários a estes Manuais

Sem comentários

Ryobi RY30931 Manual do Utilizador Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Ryobi RY30931