Ryobi TS1142L Manual do Operador descarregar pdf (Página 15)

ASSEMBLY

 Using the wrench provided, loosen and remove the blade

bolt.

NOTE: The blade bolt has left hand threads. Turn blade

bolt clockwise to loosen.

 Remove outer blade washer. Do not remove inner blade

washer.

 Wipe a drop of oil onto inner blade washer and outer

blade washer where they contact the blade.

WARNING:

If inner blade washer has been removed, replace it before

placing blade on spindle. Failure to do so could cause an

accident since blade will not tighten properly.

 Fit saw blade inside lower blade guard and onto spindle.

The blade teeth point downward at the front of saw as

shown in figure 10.

 Replace outer blade washer. Double “D” flats on blade

washers align with flats on spindle.

 Depress and hold spindle lock button and replace blade

bolt.

NOTE: The blade bolt has left hand threads. Turn blade bolt

counterclockwise to tighten.

CAUTION:

Always install the blade with the blade teeth and the

arrow printed on the side of the blade pointing down at

the front of the saw. The direction of blade rotation is

also stamped with an arrow on the upper blade guard.

 Tighten blade bolt securely.

 Replace the lower blade guard and blade bolt cover.

 Replace blade bolt cover screw and tighten securely.

DUST BAG

See Figure 11.

A dust bag is provided for use on this miter saw. It fits over

the exhaust port on the upper blade guard. To install, squeeze

the two metal clips to open the mouth of the bag and slide

it on the exhaust port. Release the clips. The metal ring in

the bag should lock in between the grooves on the exhaust

port. To remove the dust bag for emptying, simply reverse

the above procedure.

NOTE: BEFORE USE,

REPLACE SCREW AND

TIGHTEN SECURELY

TO PREVENT GUARD

MOVEMENT

Fig. 10

Fig. 11

LOWER

BLADE

GUARD

BLADE

OUTER BLADE

WASHER WITH

DOUBLE “D” FLATS

BLADE

BOLT

TIGHTEN

LOOSEN

BLADE BOLT

COVER

SCREW

FLAT(S)

ON SPINDLE

BLADE

BOLT

COVER

INNER BLADE

WASHER WITH

DOUBLE “D” FLATS

DUST

BAG

EXHAUST

PORT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comentários a estes Manuais

Sem comentários

Ryobi TS1142L Manual do Operador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Ryobi TS1142L