Ryobi HPL51 Manual do Operador descarregar pdf (Página 10)

OPERATION

Fig. 4

Fig. 3

WARNING:

Do not allow familiarity with tools to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side

shields when operating power tools. Failure to do so

could result in objects being thrown into your eyes

resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this tool. The use

of attachments or accessories not recommended can

result in serious personal injury.

APPLICATIONS

You may use this tool for the purposes listed below:

 Planing the edge of a wooden door or shelf

 Planing the edge of a piece of lumber

 Making rabbet cuts in wood

ADJUSTING THE EXHAUST DIRECTION

See Figure 3.

Control the direction of debris when working in confined

areas. Change the direction of the exhaust to either the

right or left.

 Unplug the planer.

 Adjust the exhaust direction and dust bag:

 To adjust exhaust to the right: Move the exhaust direc-

tion knob to the right and install the dust bag on the right

exhaust port.

 To adjust exhaust to the left: Move the exhaust direction

knob to the left and install the dust bag on the left exhaust

port.

EXHAUST

DIRECTION

KNOB

DEPTH

ADJUSTMENT

KNOB

PLANING DEPTH

See Figure 4.

When you begin planing a rough piece of material, the planer

will only remove the high spots at first. Successive passes

will remove more and more material. By removing no more

than 1/64 in. with each pass, you will achieve the smoothest

finish, even from the roughest workpiece.

Always begin by making test cuts in scrap wood to make sure

that the planer is removing the desired amount of wood.

To set the planing depth:

 Unplug the planer.

 Turn the depth adjustment knob clockwise to reach the

maximum depth of cut.

NOTE: To protect the blades during storage, transporting,

etc., set the depth adjustment to 0.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Comentários a estes Manuais

Sem comentários

Ryobi HPL51 Manual do Operador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Ryobi HPL51